滑环找嘉驰,耐用代名词

你提滑环需求,我给解决方案
深圳市嘉驰机电科技有限公司-商城

全国服务热线

137-1425-1726 0755-33686808

嘉驰耐用滑环中心

滑环找嘉驰,耐用代名词,质保2年

非标定制电滑环系列

描述更改:嘉驰机电拥有经验丰富的滑环工程师,专门根据客户的要求量身定制,满足客户对滑环的更大电流,更多信号,更电压,更高转速,更多介质等需要。

旋转接头系列

旋转接头是为实现相对旋转的管道传输压缩空气,冷却水、液压油、导热油等流体介质的一种设备。根据传输的介质不同分为气旋转接头和液压旋转接头,也称为气滑环,液压滑环。

导电滑环系列

导电滑环不是专门为大功率设备使用的,这里的描述都是有点问题的 ,---导电滑环是专门解决360°旋转时需要通过功率电流,信号,通讯的导线缠绕问题的电气部件,是实现两个相对旋转结构的电源,数据、信号连通的电连接设备。

气电滑环系列

气电滑环也叫气电混合滑环,是由电滑环混合气旋转接头一起的同时解决过电过气或真空等介质的滑环,可以实现同时通过功率电流,控制信号,通讯,等电路和压缩空气,真空或者其他介质的360°旋转连通。

JSR-PSB012 Series Pancake Slip Ring

Product description: JSR-PSB012 series disc conductive slip ring is the type without rotor head, the diameter of central hole is 12mm, suitable for installation on the central shaft less than or equal to 12mm, slip ring can pass signal or power supply, the number of routes can be 1-24. The height of slip ring can be from 10mm to 50mm minimum, all aluminum alloy structure, the contact material is precious metal + super hard gold plating treatment, stable operation, small resistance fluctuation. It is mainly used in the special space requirements of limited height space and basically unrestricted transverse space. The outlet mode adopts stator side outlet and rotor side outlet.

查看详情

非标定制

根据客户的要求量身定制,多用于军事设备、医疗设备或大型的机械设备上。我公司具有雄厚的研发实力、先进生产设备及高科技的加工工艺,与国内著名的科研院所有着长期而广泛的合作。

查看详情

JSR-ML0204-FU20旋转接头

产品简介:JSR-ML0204-FU20旋转接头是为某机器人公司设计定制的,此款旋转接头能同时传输多路气体,能满足在360度旋转的同时传输多路气体,使其机器人能长时间的旋转工作,不会因为旋转关节的绕线而造成停产。嘉驰机电专业研发定制生产各类导电滑环、旋转接头,公司拥有10000+的成熟方案可供客户随意挑选,十几位技术24小时免费提供技术服务,8小时出图,7天打样,全国快递包邮送货上门,嘉驰机电坐落在深圳松岗,欢迎新老客户来厂参考指导。

查看详情

JSR-A8H Mercury Slip Ring

JSR-A8H是一款8级的水银导电滑环,此款水银滑环能同时传输6路30A电流,以及2路4A的控制电流,采用液态水银作为接触材质,水银滑环又叫水银旋转接头,是以液态水银作为导电介质的一种导电旋转接头,是一款应用非常广泛的一款滑环。水银滑环利用特殊密封材料、绝缘及导电技术研发生产,其壳体材质为氧化铝合金或不锈钢,用于任何旋转的信号如:微小的电压、电流、emf、热电偶、straingauge、影音讯号、高频、电脑讯号及电气连接。

查看详情

Shenzhen JARCH electrical megawatt class wind turbine power slip ring

The megawatt variable blade wind turbine slip ring developed by Jiachi Mechanical and Electrical is specially developed and designed for all kinds of wind turbines. It is specially developed and produced for the purpose of adapting to China's wind power system, with ultra-high reliability. The key main material of the slip ring is imported material, and the advanced equipment is used in the internal design to monitor the whole generator with the wind power system. The megawatt wind power slip ring developed and produced by Jiachi Mechanical & Electrical has good low temperature resistance, high humidity resistance, sand resistance, corrosion resistance, impact resistance, shock resistance, stable performance without maintenance and other characteristics, the service life can be up to 20 years or hundreds of millions of turns.

查看详情

JSR-PSA012 Series Pancake Slip Ring

Product description: JSR-PS012 series disc conductive slip ring center hole diameter 12.7mm, suitable for installation on the central shaft less than or equal to 12.7mm, slip ring can pass signal or power supply, the number of routes can be 1-24. The height of slip ring can be from 10mm to 50mm minimum, all aluminum alloy structure, the contact material is precious metal + super hard gold plating treatment, stable operation, small resistance fluctuation. It is mainly used in the special space requirements of limited height space and basically unrestricted transverse space. Outlet mode adopts side inlet and side outlet mode.

查看详情

JSR-TH100 Series Through Hole Slip Rings

JSR-TH100 series through hole slip ring, perforated diameter 100mm(applicable to OD 185mm, number of channels: 1-108, aluminum alloy structure of the whole precision conductive slip ring. Support Signal (2A) or, or 10A, 15A, 30A supply current, voltage 380VAC/24VDC, the working voltage can be customized up to 1000V; The protection level can be customized to IP65/IP68.

查看详情

JSR-BC025 High Current Slip Ring

The JSR-BC025 series is a hollow high current slip ring with an inner hole of 25mm. The hollow can be installed with a shaft or through a gas-liquid conduit. The rated current ranges from 20A, 30A, 50A to more than 1000A, with high rotation accuracy, more stable performance and longer life. The contact material is treated with precious metal + super-hard gold plating, with small torque, stable operation, long life, small resistance fluctuation, and small contact resistance, ensuring stable transmission performance. It is widely used in a series of high-current automatic slip ring equipment such as electroplating equipment and welding equipment.

查看详情

JSR-WR030 Series Waterproof Slip Rings

JSR-WR030 series waterproof conductive slip ring, Through hole inner diameter: 30mm (applicable 1-48 channels slip ring), and the integral precision conductive slip ring with all aluminum alloy structure. It supports signal, communication, or 10A~30A power supply current, with a voltage of 380VAC / 24VDC. It is specially designed for underwater operation and waterproof operation. It is an industrial-grade product, through-hole installation, waterproof IP68, gold-gold contact, imported sealing and military-grade electroplating treatment, multi-point contact-contact, waterproof gland for outgoing line, cable, etc. can be customized according to requirements.

查看详情

JSR-RAH012 Series Through Bore Multi Channel Pneumatic Slip Ring

Series via gas-electric slip ring is an inner hole of 12 mm swivel gas-electric wear shaft installation is adopted, this gas power slip ring support compressed air, vacuum, hydrogen, nitrogen, chemical mixed gas, steam and other transmission of gas medium, as well as transmission of 0-1000 - a variety of specifications of the current transmission, more can transmit at the same time, network, industrial bus, Hd signal line and other control signal transmission. This SERIES OF slip RINGS are WIDELY USED in industrial machine centers, rotary tables, heavy equipment towers, cable reels, packaging equipment, magnetic clutches, process control equipment, rotary sensors, emergency lighting equipment, robotics, exhibition/display equipment

查看详情

JSR-MPS02 Multi-channel Pneumatic Slip Ring

Product introduction: JSR-MPS02 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 2-in 2-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPS04 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

查看详情

JSR-FE012B-1SFSeries Electric Optic Slip ring

Photoelectric slip ring is composed of conductive slip ring which can transmit power supply, control signal power supply, instrument and computer automatic control of micro electric signal and smooth ring which can transmit multi-mode single-mode optical fiber signal. It can solve the transmission problem of 360° rotating optical signal and electrical signal at the same time. Suitable for use in the need of unlimited, continuous or intermittent rotation, but also need to transfer large capacity data, signal from the fixed position to the rotating position, can improve mechanical properties, simplify system operation, avoid the rotation of the active joint damage to the fiber. It can be used together with traditional electronic manifold ring to make photoelectric hybrid manifold ring to transmit power and high speed data. Can be customized to meet the needs of various solutions.

查看详情

JSR-MFO20 Series Multi Channel Fiber Optic Slip Ring

JSR-MFO20series fiber slip ring, 2-10 optical fiber channel optional (support single mode/multi-mode) in 360 degree unlimited rotation when lossless transmission data. The entire product is very compact, specifically for the space size requirements, especially suitable for application in need unrestricted, continuous or intermittent rotation, and also need to send the large capacity data from a fixed position to the rotational position, signal, can improve mechanical properties, simplifying the system operation, avoid activities due to the rotation of the joints on the damage of the fiber.

查看详情

JSR-SFO06 JSR-SFO06 Series Single Mode Fiber Optic Slip Ring

嘉驰机电JSR-FO006系列单通道光纤滑环,1路光纤(支持单模/多模)在进行360度无限制旋转的时候无损传输数据。整个产品非常紧凑,专门为对空间尺寸有要求的应用场合,特别适合应用在需要无限制的,连续或断续旋转,同时又需要从固定位置到旋转位置传送大容量数据、信号的场所,能改善机械性能,简化系统操作,避免因活动关节的旋转对出光纤的损害。

查看详情

HE012 Series Ethernet Slip Ring

JSR-HE012 series Ethernet slip ring, the inner hole is 25mm, the outer diameter is the standard 78mm compact integrated structure of 2 channels 100m/1000M Ethernet integrated precision conductive slip ring, can mixed transmission power, current, signal, etc. It has the advantages of stable transmission, no packet loss, no string code, small back loss, small insertion loss, etc. American military coating technology, precious metal + super hard gold plating treatment, ultra-low BER and ultra-high signal-to-noise ratio.

查看详情

JSR-DSM002 Series Miniature PCB Slip Ring

The DSM002 series miniature conductive slip ring developed by Shenzhen JARCH Electromechanical Institute is a miniature ultra-thin PCB disc conductive slip ring with an inner diameter of 2mm and a thickness of up to 3mm. This series of slip rings can transmit multi-channel current and control signals at the same time. The product is simple to install and easy to maintain. Compared with Jiachi mechanical and electrical conventional slip ring, its main characteristics are very thin thickness, large diameter. The contact is made of precious metal, with high stability, low torque, low loss and maintenance free, low electrical noise, long life and other characteristics, widely used in medical CT, rotating booth, LDE rotating billboard and other occasions with small installation space!

查看详情

JSR-DS012 Series Pcb Pancake Slip Ring

Shenzhen JARCH DS series PCB slide ring is specially developed for the installation of equipment with limited height and sufficient lateral space, ultrathin conductive slide ring, thickness of 6mm, the thintest is up to 5mm. Compared with Jiachi mechanical and electrical conventional slip ring, its main characteristics are very thin thickness, large diameter. The contact is made of precious metal, with high stability, low torque, low loss and maintenance free, low electrical noise, long life and other characteristics, widely used in medical CT, rotating booth, LDE rotating billboard and other occasions with small installation space!

查看详情

JSR-PSA012 Series Pancake Slip Ring

Product description: JSR-PS012 series disc conductive slip ring center hole diameter 12.7mm, suitable for installation on the central shaft less than or equal to 12.7mm, slip ring can pass signal or power supply, the number of routes can be 1-24. The height of slip ring can be from 10mm to 50mm minimum, all aluminum alloy structure, the contact material is precious metal + super hard gold plating treatment, stable operation, small resistance fluctuation. It is mainly used in the special space requirements of limited height space and basically unrestricted transverse space. Outlet mode adopts side inlet and side outlet mode.

查看详情

JSR-HCS022系列高清滑环

JSR-HCS022系列帽式滑环的外径尺寸为22毫米,体积小,结构紧凑,是嘉驰机电电子专门为国防、军用、研究所等非民用领域研发的产品,采用超厚镀金处理,进口轴承,稀有金属合金刷丝。旋转端导线和静止端导线对应使用24色彩色导线,更加便于接线操作。导电滑环采用90度角V行槽设计,让接触面更多,让旋转更顺畅,力矩更低和动态电阻更低的特点。

查看详情

JSR-MCS006 Series Miniature Capsule Slip Rings

JARCH MCS006 series super cap slip ring, slip ring diameter 6.5 mm, optional 1~12 channels. Its small structure design can meet the needs of space size, strong stability, easy installation, without flange, both ends can be connected directly, the slip ring contact point is made of gold-gold material, to ensure very low resistance fluctuation and long working life; It is used in precision instruments, electronic gimbal stabilizers, UAVs and other devices requiring 360° stable continuous or intermittent rotation.

查看详情

JSR-CS017 Series Capsule Slip Rings

The outer diameter of the JSR-CS017 series cap type slip ring is 17mm, small in size and compact in structure. It is specially developed by JARCH Electromechanical for national defense, military, research, and other non-civil fields. It adopts ultra-thick gold-plated treatment, imported bearings, and rare metal alloy brush wire. The rotating end of the wire and the static end of the wire corresponding to the use of 24-color wire, more convenient for wiring operation. Conductive slip ring adopts a 90-degree Angle V groove design, so that more contact surface so that the rotation is more smooth, torque is lower and dynamic resistance is lower.

查看详情

JSR-RAH012 Hollow Multi-channel Pneumatic Slip Ring

JSR-RAH012 series Hollow Multi-channel Pneumatic Slip Ring is an inner hole diameter 12mm slip ring, shaft installation adopted, this hybrid slip ring support compressed air, vacuum, hydrogen, nitrogen, chemical mixed gas, steam, and other transmissions of the gas medium, as well as transmission of 0~1000A variety of specifications of the current communication, more can transmit at the same time, the network, Industrial bus, HD signal line, and other control signal transmission. This series of slip rings are widely used in industrial machine centers, rotary tables, heavy equipment towers, cable reels, packaging equipment, magnetic clutches, process control equipment, rotary sensors, emergency lighting equipment, robotics, and exhibition/display equipment.

查看详情

JSR-MFV02 Multi-channel Electro-Hydraulic Slip Ring

Product introduction: JSR-MFV02 series Multi-channel Electro-Hydraulic Slip Ring(fluid,gas-electric slip ring) of JARCH is a 3-in 3-out oil,gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MFV02 series fluid-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

查看详情

JSR-MFS02 Multi-channel Electro-Hydraulic Slip Ring

Product introduction: JSR-MFS02 series Multi-channel Electro-Hydraulic Slip Ring(oil,fluid-electric slip ring) of JARCH is a 2-in 2-out oil,gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MFS02 series fluid-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

查看详情

JSR-MPV02 Multi-channel Pneumatic Slip Ring

Product introduction: JSR-MPV02 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 3-in 3-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPV03 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

查看详情

JSR-MPS02 Multi-channel Pneumatic Slip Ring

Product introduction: JSR-MPS02 series Multi-channel Pneumatic Slip Ring(gas-electric slip ring) of JARCH is a 2-in 2-out gas-electric slip ring. It adopts a rotary scheme of air outlets from the side inlet and end face, which can rotate 360 degrees to transmit compressed air, steam, vacuum, and other gaseous media. Support air pipes of 4mm, 6mm, 8mm, 12mm, 16mm, and other specifications, and the air ports are available in M5, 1/8, 1/4, 3/8, 1/2, and other specifications. JSR-MPS04 series gas-electric slip ring can not only transmit gas, but also can mix and transmit various currents from 2A to 800A; it can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc.; Solve the winding phenomenon existing in the rotation of various equipment, and ensure the stable transmission of mixed transmission media under the condition of uninterrupted rotation.

查看详情

JSR-HY006 Series Single-channel Pneumatic Slip Ring

Product Introduction: JSR-HY006-2P10-4S-1G04-0102 gas electric slip ring of JARCH, supports an 8mm air pipe, which can not only transmit gas, but also transmit various currents of 2A ~ 800A; It can mix power line, signal line, Ethernet, industrial bus, control line, solenoid valve, induction line, etc; Flange installation, and hollow shaft installation can be customized; The media include: compressed air, hydrogen, nitrogen, chemical mixed gas, steam, cooling water, hot water, hot oil, petroleum, sulfuric acid, beverages, etc. JSR-HY010-1G08 gas electric slip ring is small volume, lightweight, and has small torque.JARCH Pneumatic & Electric rotary union slip ring is specially designed for industrial automation equipment applications, which can prevent tube winding problems well, and provide 1~24 pneumatic passages and 1~200 wires power or signals.

查看详情

JSR-HF02-SMA-03-06 High Frequency Rotary Joint

JSR-HF02-SMA-03-06 is a Dual channel high-frequency slip ring. It can support 2 channels of high frequency (3GHz +6GHz) transmission under 360 ° rotation and can be used in high and low temperatures (- 55 ℃ ~ + 100 ℃). The two ends of the slip ring are connected with SMA type connectors, with stable signal transmission, ultra-low attenuation, and long service life. This product has been successfully applied to traditional artificial intelligence traffic control, missile defense radar technology, medical engineering, V-sat and satellite communication technology, TV camera system, or cable drum with sensitive cable wounds.

查看详情

JSR-HS012 Series High Speed Slip Ring

JARCH's Slip Ring JSR-HS012 Series High-Speed Slip Ring type is compact in structure, light in weight, and high in protection grade, Max. speed in 12000RPM, through bore type,ID=12mm. It adopts high-temperature alloy and composite materials used in aero-engine to ensure that the slip ring can rotate at high speed for a long time without cooling. It is mainly used for conducting and transmitting data and control signals in laboratories and various detection devices that need high-speed rotating transmission signals.

查看详情

JSR-WR030 Series Waterproof Slip Rings

JSR-WR030 series waterproof conductive slip ring, Through hole inner diameter: 30mm (applicable 1-48 channels slip ring), and the integral precision conductive slip ring with all aluminum alloy structure. It supports signal, communication, or 10A~30A power supply current, with a voltage of 380VAC / 24VDC. It is specially designed for underwater operation and waterproof operation. It is an industrial-grade product, through-hole installation, waterproof IP68, gold-gold contact, imported sealing and military-grade electroplating treatment, multi-point contact-contact, waterproof gland for outgoing line, cable, etc. can be customized according to requirements.

查看详情

JSR-EP038F Series Explosion-proof Slip Rings

JSR-EP038F series explosion-proof slip ring is an explosion-proof conductive slip ring with an outer diameter of 100mm and flange installation. The whole body of this series of explosion-proof slip rings is made of stainless steel, and the latest explosion-proof means are used inside. The wires and joints are made of high-standard explosion-proof materials. It is an explosion-proof conductive slip ring with high safety and reliability. It is suitable for working in explosive environments, such as oil platforms Explosive material packaging equipment, spinning workshop equipment, agricultural product processing equipment, coal mines, spraying, and other dangerous places. At the same time, it can meet the explosive gas environment and explosive dust environment. The explosion-proof grade can be customized according to the needs of customers.

查看详情

JSR-SM050F Servo Motor Encoder Slip Ring

JSR-SM050F encoder slip ring is specially designed for 1 ~ 12 pcs servo motors, high performance and high reliability with 6, 12 14 signal circuits, can combine with pneumatic/hydraulic rotary unions, other switch signals/ power channels, CanBus and Profibus. A servo encoder slip ring is an electrical slip ring that works for servo encoder signal and servo motor power supply. The servo encoder slip ring can save many cables and installation works to transmit data and power. Suitable for all kinds of servo/stepper motors. Supplies usually use gold contacts to avoid external interference and internal interference.

查看详情

JSR-TB012 Series Industrial Bus-CAN Bus Slip Rings

JSR-TB012 series high-speed Industrial Bus - CAN Bus Slip Rings. The inner diameter is 12 mm. It is mainly designed for high-speed data and error-free transmission protocols. The industrial bus slip ring of Jiachi Electromechanical has an independent design invention patent, Profibus, CanBUS, CANopen, DeviceNet, CC-LINK, ProfiNET, guaranteed 100% No packet loss, no alarm, and the real-time communication is guaranteed to be accurate. The contact part adopts rare metal + hard gold plating process to ensure wear resistance and oxidation resistance, thus ensuring a long service life, and can also ensure the uninterrupted and continuous transmission of the gas circuit, circuit, signal circuit, and bus signals. The product design is cutting-edge, with Precise processing and guaranteed quality.

查看详情

JSR-FS038 Series Stator Flange Slip Ring

JSR-FS038 series stator flange slip ring, the outer diameter is 100mm with connecting flange, this series of slip rings are collectively referred to as solid slip rings, with no through hole in the center, suitable for end-face installation. Compared with similar products, more channels and larger currents can be achieved. The contact material is made of precious metal + super-hard gold plating, which has small torque, stable operation, long life, small resistance fluctuation, and small contact resistance, and ensures excellent transmission performance. It is usually used to customize various sensitive signals or encoder signals. Typical applications include automation equipment, work turntables, camera pan-tilts, robots, and a series of equipment.

查看详情

JSR-FR038 Series Rotor Flange Slip Ring

JSR-FR038 series Rotor Flange Slip Ring, the outer diameter is 100mm with connecting flange, this series of slip rings are collectively referred to as solid slip rings, with no through hole in the center, suitable for end-face installation. Compared with similar products, more channels and larger currents can be achieved. The contact material is made of precious metal + super-hard gold plating, which has small torque, stable operation, long life, small resistance fluctuation, and small contact resistance, and ensures excellent transmission performance. It is usually used to customize various sensitive signals or encoder signals. Typical applications include automation equipment, work turntables, camera pan-tilts, robots, and a series of equipment.

查看详情

JSR-FR025B Series Rotor Flange Slip Ring

JSR-FR025B series Rotor Flange Slip Ring, the outer diameter is 86mm with connecting flange, this series of slip rings are collectively referred to as solid slip rings, with no through hole in the center, suitable for end-face installation. Compared with similar products, more channels and larger currents can be achieved. The contact material is made of precious metal + super-hard gold plating, which has small torque, stable operation, long life, small resistance fluctuation, and small contact resistance, and ensures excellent transmission performance. It is usually used to customize various sensitive signals or encoder signals. Typical applications include automation equipment, work turntables, camera pan-tilts, robots, and a series of equipment.

查看详情

JSR-FR025 Series Rotor Flange Slip Ring

JSR-FR025 series Rotor Flange Slip Ring, the outer diameter is 78mm with connecting flange, this series of slip rings are collectively referred to as solid slip rings, with no through hole in the center, suitable for end-face installation. Compared with similar products, more channels and larger currents can be achieved. The contact material is made of precious metal + super-hard gold plating, which has small torque, stable operation, long life, small resistance fluctuation, and small contact resistance, and ensures excellent transmission performance. It is usually used to customize various sensitive signals or encoder signals. Typical applications include automation equipment, work turntables, camera pan-tilts, robots, and a series of equipment.

查看详情

JSR-FR012 Series Rotor Flange Slip Ring

JSR-FR012 series Rotor Flange Slip Ring, the outer diameter is 56mm with connecting flange, this series of slip rings are collectively referred to as solid slip rings, with no through hole in the center, suitable for end-face installation. Compared with similar products, more channels and larger currents can be achieved. The contact material is made of precious metal + super-hard gold plating, which has small torque, stable operation, long life, small resistance fluctuation, and small contact resistance, and ensures excellent transmission performance. It is usually used to customize various sensitive signals or encoder signals. Typical applications include automation equipment, work turntables, camera pan-tilts, robots, and a series of equipment.

查看详情

JSR-TH0335 Series Through Hole Slip Rings

JSR-TH0335 series through hole slip ring, perforated diameter 3mm(applicable to OD 35mm, number of channels: 1-12, aluminum alloy structure of the whole precision conductive slip ring. Support Signal (2A) or, 5A or 10A supply current, voltage 220VAC/24VDC, the working voltage can be customized up to 1000V; The protection level can be customized to IP65/IP68.

查看详情

JSR-TH0735 Series Through Hole Slip Rings

JSR-TH0735 series through hole slip ring, perforated diameter 7mm(applicable to OD 35mm, number of channels: 1-12, aluminum alloy structure of the whole precision conductive slip ring. Support Signal (2A) or, 5A or 10A supply current, voltage 220VAC/24VDC, the working voltage can be customized up to 1000V; The protection level can be customized to IP65/IP68.

查看详情

JSR-BC025 High Current Slip Ring

The JSR-BC025 series is a hollow high current slip ring with an inner hole of 25mm. The hollow can be installed with a shaft or through a gas-liquid conduit. The rated current ranges from 20A, 30A, 50A to more than 1000A, with high rotation accuracy, more stable performance and longer life. The contact material is treated with precious metal + super-hard gold plating, with small torque, stable operation, long life, small resistance fluctuation, and small contact resistance, ensuring stable transmission performance. It is widely used in a series of high-current automatic slip ring equipment such as electroplating equipment and welding equipment.

查看详情

JSR-HS012 Series High Speed Slip Ring

JARCH's Slip Ring JSR-HS012 Series High-Speed Slip Ring type is compact in structure, light in weight, and high in protection grade, Max. speed in 12000RPM, through bore type,ID=12mm. It adopts high-temperature alloy and composite materials used in aero-engine to ensure that the slip ring can rotate at high speed for a long time without cooling. It is mainly used for conducting and transmitting data and control signals in laboratories and various detection devices that need high-speed rotating transmission signals.

查看详情

高品质耐用导电滑环为什么选嘉驰

滑环找嘉驰,耐用代名词,16年实力沉淀,2年质保

01

一站式服务,交期迅速

免费提供技术方案,8小时快速出图

嘉驰机电只需客户提供您对导电滑环、气电滑环、光纤滑环、液压旋转接头、帽式滑环等一系产品的要求,即可享受数十位技术24小时免费提供技术方案,八小时出图,七天打样,国内包邮送货上门的一站式服务。导电滑环厂家选嘉驰,坐享其成无忧愁!
免费提供技术方案,8小时快速出图
02

耐用滑环,经验丰厚

你提滑环需求,我给解决方案,经验丰富,值得信赖

嘉驰机电所研发生产的导电滑环、气电滑环、光纤滑环、旋转接头等一系的产品被广泛的应用于航空航天、航海潜水、军工设备、风力发电、工业自动化等一系的高科技领域。长期为华为、富士康、比亚迪、西门子等多达30+的世界五百强企业长期提供导电滑环的定制服务。
你提滑环需求,我给解决方案,经验丰富,值得信赖
03

耐用滑环,品质保证

滑环找嘉驰,耐用代名词,质保2年,品质信赖

嘉驰机电所研发生产的导电滑环、旋转接头等一系列的产品用材十分讲究。产品内部接触材料采用镀金处理,外壳采用航空铝合金精密加工而成,表面经阳极氧化处理,旋转部分采用进口的NSK轴承承担,无条件提供质保2年的服务,产品远销世界100多个国家,与国外1000多家公司建立了长期合作关系。
滑环找嘉驰,耐用代名词,质保2年,品质信赖
04

耐用滑环,实力强劲

国家高新企业,16年行业大品牌,导电滑环找嘉驰

专业研发生产导电滑环、气电滑环、光纤滑环、旋转接头等一系列的精密耐用滑环16年, 拥有数十人的研发团队,10000+的成熟方案积累,多次被评为“国家高新技术企业”,并连续多年通过“ISO900”质量体系认证,获得CE、FCC等多项国际认证。
国家高新企业,16年行业大品牌,导电滑环找嘉驰
游乐设备
移动供电
工程机械
医疗设备
新能源
自动化设备
军用设备
钢铁行业

免费获取你的专属方案

石油天然气 134****5768 领取了免费方案 3分钟前
娱乐设施 181****9655 领取了免费方案 10分钟前
工业自动化 135****1184 领取了免费方案 15分钟前
风力发电 131****8656 领取了免费方案 20分钟前
航空航天 135****2388 领取了免费方案 25分钟前
军事设备 139****1113 领取了免费方案 30分钟前
重型设备 134****2823 领取了免费方案 35分钟前
食品医药 135****6163 领取了免费方案 40分钟前
indexForm-bf

真材实料不怕比,耐用滑环就选嘉驰

产品远销世界100多个国家,与国外1000多家企业建立了长期的合作

嘉驰滑环

坚固

嘉驰滑环转动轴承

采用进口NSK高速轴承,转速快,扭力小,坚固耐用,最高转速可达50000转,使用寿命高达2亿转。

坚固

其他公司

其他公司接触材料

其他公司转动轴承

为节约成本使用国内劣质轴承,扭力大,转动卡顿,使用寿命短。

耐用

嘉驰滑环外壳材料

外壳采优质304不锈钢精密加工而成,所有缝隙经硅胶灌封处理,坚固耐用抗腐蚀性强,防护等级可达IP68。

耐用
其他公司接触材料

其他公司外壳材料

外壳采用所谓的工程塑料挤压而成,用材便宜,加工粗糙,无法保证滑环的长时间正常使用。

耐磨

嘉驰滑环接触材料

滑环内部接触材料采用贵金属镀金处理,既能保证接触材料的耐磨性又能保证滑环能360°无间断的传输电流信号。

耐磨
其他公司接触材料

其他公司接触材料

内部接触材料采用普通金属镀铜处理,耐磨性差,传导能力没有保障。

耐用滑环广泛应用30多个高科技领域

华为、富士康等500强企业客户长期信赖

导电滑环定制

选嘉驰需求全满足

  • 性能定制

    性能定制

  • 参数定制

    参数定制

  • 功率信号

    功率信号

  • 介质混合

    介质混合

indexForm02

滑环专业资讯

Slipring professional information

导电滑环信号传输不稳怎么办

大家都知道导电滑环是可以旋转传输各种介质的电气产品,大家也在使用导电滑环的时候遇到过很多的问题,像导电滑环无法正常旋转,导电滑环短路烧毁怎么办,还有就是导电滑环传输的信号总是不稳定等,其实这些问题都是我们在使用导电滑环的时候遇到的小问题,今天嘉驰导电滑环的小编就和大家讲讲导电滑环传输的信号不稳定总是被干扰怎么办。

2022-05-31

岸电绞车滑环如何安装

随着国家对船只岸电项目的改造,所有的船舶必须按照能与岸基电源连接的绞车,这也使得绞车行业迎来了一大波的订单。导电滑环作为电缆绞车中不可缺少的旋转传输部件同样的迎来了一大波的订单。但是由于岸电改造中的岸电绞车是在船上使用,这就是使得与之配套的导电滑环也要进行正对性的设计,使其能在船上正常的使用。

2022-05-31

消息提示

关闭